Please note this is not sold in our store – It is Shipped from a seure Location – Online Orders Only
On-Site Installation for this product is Available for $100 an Hour + GST
7/12/18-V

The post Side-Power SP285 TCI 74′-100′ appeared first on Docking by Control.

To provide reliable & safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern & other locations that may get wet or be exposed to petrol fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no petrol fumes can enter & be ignited by sparks. The other advantage is that the electric parts that could be damaged by water are also covered & protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry.

• Intelligent power control (IPC)
• Galvanic separation/insulation
• Ignition protected
• Q-prop propeller
• Single propellers
• Gravity feed lubrication
• Sealed drive/lifetime lubricated
• New flexible coupler
• Revised gearleg/end caps
• Design upgrades
• Internal Tunnel Diameter: 185mm
• Propulsion System: Twin, 5-Blade
• Boat Size: 35 to 48′

The post SE 80/185T-185-12V or 24V 35′ to 48′ appeared first on Docking by Control.

With its outstanding energy efficiency and unrivaled reliability, the SE60/185S is the classic and best selling thruster in the Side-Power series and includes all the important and unique Side-Power features and qualities – why settle for less?

The post SE 60/185 S (boats 29′ – 38′) appeared first on Docking by Control.

Yet another tunnel diameter in our world-leading range of DC thrusters are now available. The new SE50/140S delivers an actual thrust of 50 kg at 10.5 V in a 140 mm tunnel diameter.

Please note that the SE50 will not be available for stern installation. Please consider SE40, SE60 or EX Compact as good alternatives.

Features are similar to the SE60, except that SE50 incorporates a flexible coupling and are therefore also galvanic insulated.

The post SE 50/140 S (boats 27′ – 37′) appeared first on Docking by Control.

The SE40/125S have the same compact measurements as the SE30/125S, but with 10 more kg of thrust. The SE40/125S includes all the important and unique Side-Power features and qualities – why settle for less.

To provide reliable & safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern & other locations that may get wet or be exposed to petrol fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no petrol fumes can enter & be ignited by sparks. The other advantage is that the electric parts that could be damaged by water are also covered & protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry. The SE40 thruster gets every ounce of power you could want out of a 5″ tunnel thruster. Side-Power’s proprietary IPC system ensures safety & reliability while maintaining high thrust output & low-noise operation. Customize your thruster system with our wide range of controls, remotes & other add-ons.

• Intelligent power control (IPC)
• Galvanic separation/insulation
• Ignition protected
• Q-prop propeller
• Single propellers
• Gravity feed lubrication
• Sealed drive/lifetime lubricated
• New flexible coupler
• Revised gearleg/end caps
• Design upgrades
• Power: 2.2kW at 10.5 Volts
• Internal Tunnel Diameter: 125mm
• Propulsion System: Single, 5-Blade
• Boat Size: 26 to 34′
• Battery Capacity: 570 CCA SAE

The post SE 40/125S (boats 26′ – 34′) appeared first on Docking by Control.

• Suitable for boats 60 to 84 feet.
• Available in 24V
• Tunnel diameter 300mm/ 11,8”
• Counter-rotating
• 528lbs of thrust

This is probably the most powerful 24 V thruster on the market. It is an upgrade of our very popular SP220TC model, to better position itself in the range between the SP200TC model, and the SP285TC (48V unit). Now you get 20 extra kgs of thrust without a change in the cost and this new model also has the latest IPC* as standard.

The post SE 250 TCi (60′ – 84′) appeared first on Docking by Control.

• Suitable for boats 55 to 78 feet.
• Available in 24V

Side-Power’s new range of proportional speed control DC thrusters allows you to select the power you need for precise boat movements in any weather and sea conditions. The unique “hold” feature allows you to keep the boat in position at the dock or in locks.

Side-Power 210kg Proportional Speed Control DC Thruster, 24V, Twin Counter-Rotating 5-blade Props, Sealed gear leg, 250mm

The post SE 210 TC (55′ – 78′)SE210/300TC32 appeared first on Docking by Control.

• Suitable for boats 50 to 70 feet.
• Available in 24V

The SE170 packs the power of twin counter-rotating props into a 10″ tunnel to generate exceptional power for boats from 50-70′. It also features Sidepower’s patented IPC control system, making it the safest thruster available today.

The post SE 170/250 TC (boats 50′ – 70′) appeared first on Docking by Control.

• Suitable for boats 44 – 64 feet.
• Available in 24V

Side-Power’s new range of proportional speed control DC thrusters allows you to select the power you need for precise boat movements in any weather and sea conditions. The unique “hold” feature allows you to keep the boat in position at dock or in locks

The post SE 150/215 T (44′ – 64′) appeared first on Docking by Control.

Side-Power SE130/250-12IP, Twin Prop, 286 lbs. of Thrust, Ignition Protected.

The post SE 130/250 T (42′ – 62′ boats) appeared first on Docking by Control.